Filter

Huawei eKit Access Router AR720 - Image 3

Huawei eKit Access Router AR720 - Image 4

Huawei eKit Access Router AR720 - Image 5

Huawei eKit Access Router AR720 - Image 6

Huawei eKit Access Router AR720 - Image 7

Huawei eKit Access Router AR720 - Image 8

Huawei eKit Access Router AR720

KSh 200,000.00 Exc. Tax

Huawei eKit Access Router AR720

Integrated firewall with IPS, URL filtering and VPN
Integrated switch
2 module slots for optional expansion (various LAN, WAN and LTE interface cards), hot swap
Supports maximum 700 devices, bandwidth: 4 Gbps
2x GE Combo WAN, 8x GE 10/100/1000 Base-T Ports LAN
19 inch assembly

Genuine product Secure checkout Warranty and order support

Category: Huawei Router

Description
Reviews (0)

Huawei eKit Access Router AR720

Item	Details
Description	AR720, 2GE combo WAN, 8GE LAN, 2USB 2.0, 2SIC
Part Number	02354GBG-001
Model	AR720
First supported version	V300R022C00
Supported Patch Version	If you want to downgrade a device running V300R022C10SPC100 or a later version to V300R019C10SPC600, V300R019C13SPC200, or V300R021C00SPC200 after the component upgrade, downgrade the device to V300R022C00SPC100 first. If you want to downgrade a device to a version earlier than V300R022C00SPC100 after the component upgrade, set the patch for next startup to the start patch of the target version or a later patch. (The start patch of V300R019C10SPC600 is V300R019SPH380; the start patch of V300R019C13SPC200 is V300R019SPH380; the start patch of V300R021C00SPC200 is V300R021SPH180.)
Remarks	When configuring cards, ensure that the total power of the configured cards does not exceed 37 W or contact technical support engineers to obtain more suggestions.

Appearance

Figure 2-2 Appearance of the AR720

Components

Figure 2-3 Components of the AR720

1. Product model silkscreen	2. LAN interfaces: eight GE electrical interfaces	3. Two SIC slots
4. Ground point	5. AC power jack	6. Jack for power cable locking strap NOTE: Insert a power cable locking strap in this jack to secure the power cable.
7. RESET button NOTE: This button is used to reset the router. To restore the factory settings, hold down the button for at least 5 seconds. To reset the router, hold down the button for less than 5 seconds. Resetting the router will interrupt services. Exercise caution when deciding to press this button.	8. WAN interfaces: two GE combo interfaces	9. USB interface 2.0 (host)
10. USB interface 2.0 (host)	11. Console interface	–

Slot Layout

Figure 2-4 Slot Layout of the AR720

Table 2-4 Slots on the AR720

Slot Type	Slot ID	Slot Direction	Remarks
SIC	1	Transverse	Slot 1 and slot 2 are combined into new slot 2 (WSIC).
SIC	2	Transverse	Slot 1 and slot 2 are combined into new slot 2 (WSIC).

Ports

Table 2-5 Ports on the AR720

Port	Connector Type	Description	Available Components
Console interface	RJ45	The console interface can connect to an operation terminal for onsite configuration. Standards compliance: RS232 Working mode: duplex Universal Asynchronous Receiver/Transmitter (UART) Data equipment type: Data Circuit-terminating Equipment (DCE)	Console cable
LAN interfaces: eight GE electrical interfaces	RJ45	A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. Standards compliance: IEEE802.3, IEEE802.3u, and IEEE802.3ab Working mode: full-duplex (10/100/1000 Mbit/s auto-sensing) Maximum distance: 100 m NOTE: GE0 is a management interface and is used for web-based management and email-based deployment. All LAN-side GE interfaces can be configured as WAN-side interfaces.	Ethernet cable
WAN interfaces: two GE combo interfaces	GE electrical interface: RJ45 GE optical port: LC/PC	A GE combo interface consists of an optical Ethernet interface and an electrical Ethernet interface on the panel. The two interfaces have only one internal forwarding interface. The electrical and optical interfaces are multiplexed, and only either of them can work at a time. When either of the Ethernet interfaces is working, the other interface is shut down. The GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s. The GE optical interface (100/1000 Mbit/s auto-sensing) transmits and receives services at 100 Mbit/s or 1000 Mbit/s. NOTE: By default, a combo interface works in auto mode and automatically works as an optical or electrical interface.	GE electrical port: Ethernet cable GE optical interface: optical module The following optical modules are supported: FE SFP&eSFP Optical Modules GE eSFP Optical Modules GPON&EPON Optical Modules GE SFP Copper Modules
USB 2.0 ports (Host): two USB 2.0 ports	USB 2.0 Type A	A USB 2.0 interface provides up to 480 Mbit/s upload and download rates. Standards compliance: USB 2.0 Working mode: Host	USB 2.0-compliant USB flash drive