Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch

Name: Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch
Availability: OutOfStock

KSh 132,000.00 Exc. Tax

Discounted prices in Nairobi kenya

Out of stock

Category: D-link Network

Description

Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch

The DES-3200 switches is a line of managed switches D-Link 2-level, intended for networks Metro Ethernet (ETTX and FTTX) and corporate networks. Switches in this series are equipped with 8/16/24/48 port 10/100 Mbit / s Fast Ethernet, as well as combo port 1/2/4 Gigabit Ethernet / SFP. Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch made in the body width of 9.11 inches and are equipped with a passive cooling system, suitable for desktop use and for use in telecommunications and cabinets. Switches DES-3200-26,28,28 / ME, 28F, 52 1U height designed for installation in 19-inch rack and provides a connection to copper or optics (24/48 port) at a speed of 100 Mbit / c. All devices have a series of practical design with 1, 2 or 4 combo ports of Gigabit Ethernet / SFP, which provide bandwidth of up to 4 Gb / s and allow to use these switches in a ring topology. Switch DES-3200-28 / ME is made specifically for use in telecommunication closets, where operators and engineers have access only to the front of the device and need quick troubleshooting. All interfaces are located on the front of the DES-3200-28 / ME, including the connector for the power cable that meets the requirements of large networks. In addition, the switch DES-3200-28 / ME is equipped with a connector “dry contacts” for event detection and alarm. DES-3200-28F is the ideal solution for network deployment FTTX, allowing you to bring fiber optic line directly to the subscriber unit. Through the use of a switch DES-3200-28F fiber-optic communication lines to connect subscribers significantly increased transmission distance (up to 20 km) and excludes the impact of crosstalk inherent in copper. Switches DES-3200-28P / 52P meet the standards of PoE (Power over Ethernet-cable) IEEE 802.3af and IEEE 802.3at and provide power up to 15.4 watts per port and up to 30 watts on the first four / eight ports. Supports PoE / PoE + devices such as video / IP-phones, wireless access points and IP-cameras, lets you apply power to them directly from the switch to Ethernet-cable, which greatly simplifies network deployment. All switches DES-3200 series are equipped with 2 or 4 Gigabit ports SFP, which provides the ability to select the type of network topology, “ring”, “tree” or mixed type.

Safety and reliability

Switches DES-3200 series supports access control based on 802.1x port / host, the ability to create a guest VLAN, and authentication and RADIUS / TACACS / XTACACS / TACACS + when connected to a switch. Function IP-MAC-Port Binding allows administrators to bind IP-address and MAC address of the user to a specific port number on the switch, thereby prohibiting the user to change the network settings. Moreover, thanks to the DHCP Snooping, the switch automatically detects pairs of IP / MAC-addresses issued by the server, DHCP-tracking packages and storing them in a “white list” IMPB. These features play a significant role in the support of network security. Built-in D-Link Safeguard Engine provides identification and prioritization of packets to be processed directly by the CPU switch to prevent malicious attacks and counteract the effects of parasitic traffic on the CPU switch. In addition, DES-3200 supports the list contains a complete access control (ACL). This functionality allows administrators to restrict access to network services and does not affect the performance of the switch.

Resilience / performance

Switches DES-3200 series supports the Protocol 802.1D-2004 edition, 802.1w and 802.1s Multiple Spanning Tree (MSTP). STP allows you to organize backup route data used in the event of any failed switch on the main route of the network traffic. The switches also support link aggregation, standards-based 802.3ad (LACP) and 802.1AX, allowing you to group multiple ports, increasing the bandwidth and increasing fault tolerance connections between network devices. The switches support 802.1p for Quality of Service (QoS). In addition, the traffic can be prioritized on the basis of marks TOS, DSCP, MAC-addresses or IP-address of the client, Vlan number, port number, TCP / UDP, protocol type, or based on the contents of packets specified by the user. This functionality is especially important in the provision of IPTV. Also DES-3200 series supports functional Voice VLAN, is a separate vlan, which is automatically placed in voice traffic, with a view to its subsequent processing with a higher priority level than the rest of the traffic.

Traffic Control and Bandwidth

With Bandwidth Control allows network administrators to define bandwidth for each port increments up to 8 kbit / s for incoming and outgoing traffic. The switches also support the functional protection from the storm (Storm Control), which allows you to get rid of unnecessary broadcast / multicast traffic. Port Mirroring facilitate traffic diagnostics and helps administrators to monitor network performance. Switches DES-3200 series supports markers “two-speed, three-colored marking” and “One speed, three color labeling” (trTCM / srTCM), allowing due to the decomposition of flows on the priorities to ensure maximum throughput of important traffic.

Multicasting

Switches DES-3200 series supports a complete set of functions for working with L2 multicast, including IGMP Snooping, IGMP filtering, Fast Leave. Thanks to the support of the functional switch DES-3200 provides an opportunity to work with IPTV-services, enjoys a growing demand in the market.

IGMP / MLD Snooping provides host-based connection of multiple customer multicast group to one network interface. When using the ISM VLAN multicast traffic for the purpose of efficient spending bandwidth transmitted in a separate Vlan. ISM VLAN profiles allow users to quickly and easily assign / change the preset settings on ports multicast subscribers.

OAM

Switches DES-3200 series support the diagnosis cable to check the status of network cables and identify the cause of malfunction of the cable. Function 802.1ag Connectivity Fault Management (CFM) provides tools for surveillance, as well as for troubleshooting in complex and Ethernet-enabling service providers to perform the connection test and quickly locate network problems, identify the user faced with these problems. Functions 802.3ah Ethernet OAM, Dying Gasp and D-Link Unidirectional Link Detection (DULD) can improve network manageability and increase stability of the compound, as well as to detect the fault.

Management functions

Switches DES-3200 series supports standard management protocols such as SNMP, RMON, Telnet, SSH / SSL. The user-friendly web interface for easy management. DHCP automatically is an enhanced management feature that allows administrators to pre-configure the settings and save them to a TFTP-server and automatically apply to the switches in the process of obtaining IP-address from the server that makes network configuration easier and faster. Supported protocols LLDP and LLDP-MED enables detection used in an Ethernet network equipment. In accordance with the result of the search, the administrator can easily apply the settings for device discovery and obtain a graphical representation of the topology using the network management system (NMS).

Function D-Link Single IP Management (SIM) simplifies and improves the efficiency of management tasks, allowing the simultaneous configuration of multiple switches, surveillance and maintenance from any location using a Web-browser. Moreover, the switch DES-3200 series supports software D-View 6.0. D-View 6.0 is a Network Management System that allows you to improve the most important for the network characteristics such as availability, reliability, fault tolerance and security. D-View 6.0 provides network administrators with a set of useful tools for effective configuration management, performance and security, as well as error detection.

Support for IPv6

Switches DES-3200 series has successfully passed the certification IPv6 Ready Logo Phase 2, which guarantees the operation of the switch in networks IPv6. In addition, this series supports both protocol stacks IPv4 / v6, allowing switches to act as a bridge between IPv4 and IPv6. With the constant expansion of the network security problem is most acute. To solve it, a series of DES-3200 supports features such as IPv6 ACL, IMPBv6 and L3 Control Packet Filtering, designed to protect against network attacks in IPv6 networks.

SPECIFICATION

Interface

48 10/100BASE-TX PoE
2 10/100/1000BASE-T
2 Combo 10/100/1000BASE-T or 100/1000 SFP

PoE Support

PoE Budget

370W

PoE Ports

1-48

PoE+ Ports

Console Port

RJ-45

Performance

Switching Capacity

17.6 Gbps

63-Byte Packet Forwarding Rate

13.1 Mpps

MAC Address Table-Size

16K Entries

SDRAM for CPU

128 MB

Packet Buffer

1.5MB

Flash Memory

32 MB

Jumbo Frame

12kb

Physical & Environmental

LEDs

Power (Per Device)
Console (Per Device)
Link/Activity/Speed (Per Port)

Acoustic

39.3 dB at low speed
51.2 dB at high speed

Heat Dissipation

1608.196 BTU per hour

Power Input

100 to 240 VAC, 50 to 60 Hz Internal Universal Power Supply

Max Power Consumption

471.6 watts

Dimensions

17.36” x 12.13” x 1.732” (441 x 308 x 44 mm)
19-inch Standard Rack-Mount Width, 1U Height

Ventilation

Smart Fans

Power Surge Protection

All Ethernet ports support IEC61000-4-5 10/700us 6 KV surge protection

Operating Temperature

23°F to 112°F (-5° to 50°C)

Storage Temperature

-40°F to 158°F(-40° to 70°C)

Operating Humidity

10% to 90% non-condensing

EMI

FCC Class A
CE Class A
VCCI Class A
IC
C-Tick

Safety

CE LVD
UL/cUL
CB

3rd Party Certifications

MEF 21, IPv6 Ready Logo

MTBF

189,396 hours
Software Features

Stackability

Virtual Stacking: D-Link Single IP Management, Up to 32 units per Virtual Stack

L2 Features

MAC Address Table: 8k
Flow Control:
802.3x Flow Control
HoL Blocking Prevention
Loopback Detection
Port Mirroring:
Supports 1 Mirroring group
Supports One-to-One, Many-to-One, Flow-based (ACL) Mirroring
Ethernet Ring Protection Switching (ERPS)

L2 Protocol Tunneling

Spanning Tree Protocols
802.1D STP
BPDU Filtering
802.1w RSTP
Root Restriction
802.1s MSTP
802.1Q-2005 MSTP

Link Aggregation

Max. 14 groups (8 ports per group) Compliant with 802.1AX (formerly 802.3ad)

L2 Multicasting

IGMP Snooping:
IGMP v1/v2 Snooping, IGMP v3 awareness
Supports 1K groups
Port/Host-based IGMP Snooping Fast Leave
Limited IP Multicasting:
Up to 24 IGMP filtering profiles, 128 ranges per profile
MLD Snooping:
MLD v1, MLD v2 awareness
Supports 1K groups
IGMP Authentication

VLAN

802.1Q Tagged VLAN VLAN Group: Max. 4K VLAN
Port-based VLAN
MAC-based VLAN
GVRP: Max. 255 dynamic VLANs
802.1v Protocol VLAN
VLAN Trunking
Asymmetric VLAN
Double VLAN (Q-in-Q):
Port-based Q-in-Q
Selective Q-in-Q
ISM VLAN
VLAN Translation

L3 Features

Gratuitous ARP

Quality of Service (QoS)

Port-based Bandwidth Control: Ingress/Egress, min. granularity 8kbps)
Flow-based Bandwidth Control:(Ingress, min. granularity 8 kbps))
Per egress queue Bandwidth Control
4 queues per port
DSCP
802.1p
Queue Handling:
Strict Priority
Weighted Round Robin (WRR)
Strict + WRR
Remark 802.1p Priority Tag
Remark ToS/DSCP Tag
Bandwidth Control
Flow Statistics
Time-based QoS
CoS Based on:
Switch Port
VLAN ID
802.1p Priority Queues
MAC Address
Ether Type
IPv4/v6 Address
IPv6 Traffic Class
IPv6 Flow Label
TOS
DSCP
Protocol Type
TCP/UDP Port
User-defined packet content

Access Control List (ACL)

ACL based on: Switch Port
VLAN ID
802.1p Priority Queues
MAC Address
Ether Type
IPv4/v6 Address
IPv6 Traffic Class
IPv6 Flow Label
ToS
DSCP
Protocol Type
TCP/UDP Port
User Defined Packet Content
Up to 512 ingress access rules
Time-based ACL
ACL Statistics
CPU Interface Filtering

Security

SSH v2
SSL v1/v2/v3
Port Security: up to 64 MAC addresses per port
Broadcast/Multicast/Unicast Storm Control
IP-MAC-Port Binding (IMPB):
ARP Inspection
IP Inspection
DHCP Snooping
Traffic Segmentation
D-Link Safeguard Engine
DHCP Server Screening
DHCP Client Filtering
DoS Attack Prevention
ARP Spoofing Prevention
BPDU Attack Protection

AAA

Guest VLAN
RADIUS
TACACS+
XTACACS+
Trusted Host
RADIUS Accounting
Two-level User Account

802.1X

Port-based Access Control
Host-based Access Control
Dynamic VLAN Assignment
Identity-driven security policy assignment: QOS, VLAN

MAC-based Access Control (MAC)

Port-based Access Control Host-based Access Control
Dynamic VLAN Assignment
Authentication Database Failover
Identity-driven security policy assignment: QoS, ACL, VLAN

Microsoft® NAP (IPv4/v6)

Supports 802.1x NAP
Supports DHCP NAP

Management

Web-based GUI (Supports IPv4/v6) Command Line Interface (CLI)
Telnet Server/Client (Supports IPv4/v6)
TFTP Client (Supports IPv4/v6)
ZModem
SNMP v1/v2c/v3
SNMP Traps
System Log
RMON v1: Supports 1,2,3,9 groups
RMON v2: Supports ProbeConfig group
BootP/DHCP Client
DHCP Auto-Configuration
DHCP Relay
DHCP Relay Option 12
DHCP Relay Option 82
PPPoE Circuit-ID Tag Insertion
Dual Image
CPU Monitoring
SNTP
LLDP
Debug Command
Password Encryption

SMTP

Ping (Supports IPv4/v6)
Traceroute (Supports IPv4)
Command Logging
ICMPv6
Microsoft® NLB (Network Load Balancing) Support

OAM

Cable Diagnostics
802.3ah Ethernet Link OAM
Dying Gasp
802.1ag Connectivity Fault Management (CFM)

802.3ah D-Link Extension: D-Link Unidirectional Link Detection (DULD)

MIB
RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
RFC 1157, 2571-2576 SNMP MIB
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1215 MIB Traps Convention
RFC 1398, 1643, 1650, 2358, 2665 Ether-like MIB
RFC 1493 Bridge MIB
RFC 1757, 2819 RMON MIB
RFC 1907 SNMPv2 MIB
RFC 2021 RMONv2 MIB
RFC 2233, 2863 IF MIB
RFC 2618 RADIUS Authentication Client MIB
RFC 2620 RADIUS Accounting Client MIB
RFC 2674, 4363 802.1p MIB
RFC 2925 PING & TRACEROUTE MIB
RFC 4188 Bridge MIB

IETF® Standard

RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792, 2463, 4443 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 Telnet
RFC 951, 1542 BootP
RFC 1321, 2284, 2865, 3580, 3748 Extensible Authentication Protocol (EAP)
RFC 1492 TACACS
RFC 1981 Path MTU Discovery for IPv6
RFC 2068 HTTP
RFC 2460 IPv6
RFC 2461, 4861 Neighbor Discovery for IPv6
RFC 2462, 4862 IPv6 Stateless Address Auto Configuration
RFC 2463, 4443 ICMPv6
RFC 2464 IPv6 Ethernet and definition
RFC 2474, 3260 Definition of the DS field in the IPv4 and IPv6 Headers
RFC 2544 Benchmarking Methodology for Network Interconnect Devices
RFC 2571, 2572, 2573, 2574 SNMP
RFC 2866 RADIUS Accounting
RFC 2893, 4213 IPv4/IPv6 dual stack function
RFC 3513, 4291, IPv6 Addressing Architecture

Warranty

Limited Lifetime

Also Check

Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch

Dlink DES-3200-52P 48-port 10/100Base-T PoE + 2 1000Base-T ports + 2 Combo 1000Base-T/SFP ports Managed Switch

SPECIFICATION

Related products

Login